Command Manual – PoE
Quidway S8500 Series Routing Switches
Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-2
Table 1-1
Description on the fields of the
display poe interface
command
Field
Description
Port power status
PoE status of the port:
1) disabled: PoE is disabled on the port.
2) searching: the port is searching for a PD.
3) delivering: the port is supplying power to the PD.
4) PD disconnected: the port is not connected with a
PD.
5) testing: the port is in testing.
6) fault: the port detected an nonstandard or fault PD.
Port power mode
PoE mode of the port:
1) auto: the system automatically selects the PoE mode.
2) signal
3) spare
Port PD class
The class of the power the port supplies to the PD
Port power priority
Port priority:
1) critical (the highest)
2) high
3) low
Port max power
Maximum power on the port
Port current power
Present power on the port
Port average power
Average power on the port
Port peak power
Peak power on the port
Port current
Present current on the port
Port voltage
Present voltage on the port
Port remaining power
Remaining power on the port
Note:
z
The sampling cycle of the power, current and voltage of ports is 1 second;
z
The sampling cycle of the peak power and average power of ports is 5 minutes
1.1.2 display poe interface power
Syntax
display poe interface power
{
interface-name
|
interface-type interface-num
}
