Command Manual – MPLS
Quidway S8500 Series Routing Switches
Chapter 3 MPLS L2VPN Configuration Commands
Huawei Technologies Proprietary
3-11
Example
# Create a CE for VPNA named “beijing”, with the CE ID of 1. Use the default range
(10).
[Quidway] mpls l2vpn
[Quidway] mpls l2vpn vpna encapsulation ethernet
[Quidway-mpls-l2vpn-vpna] ce beijing id 1
[Quidway-mpls-l2vpn-ce-vpna-beijing]
3.3.2 connection
Syntax
connection
[
ce-offset
offset
] {
interface
vlan-interface
vlan-id
}
undo connection
[
ce-offset
offset
] {
interface
vlan-interface
vlan-id
}
View
MPLS L2VPN CE view
Parameter
offset
: Specifies the ID of the remote CE of the L2VPN connection to create a remote
CE connection.
vlan-id
: ID of the VLAN whose interface is used to establish the connection.
Description
Use the
connection
command to create a connection for the CE.
Use the
undo connection
command to remove the specified CE connection.
You need to configure the route distinguisher (RD) for the MPLS L2VPN before creating
a CE connection.
Related command:
mpls l2vpn encapsulation
.
Example
# Create a CE connection.
[Quidway] mpls l2vpn vpna
[Quidway-l2vpn-vpna] ce ce-a id 1 range 4
[Quidway-l2vpn-vpna-ce-ce-a] connection interface vlan-interface 201
3.3.3 display bgp l2vpn
Syntax
display bgp l2vpn
{
all
|
peer
|
route-distinguisher ASN
}
