Command Manual – PoE
Quidway S8500 Series Routing Switches
Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-7
[Quidway] undo poe max-power slot 3
1.1.8 poe mode
Syntax
poe mode
{
signal
|
spare
|
auto
}
undo poe mode
View
Ethernet port view
Parameter
signal
: The port supplies power through signal lines.
spare
: The port supplies power through spare lines.
auto
: The port supplies power in automatically selected mode.
Description
Use the
poe mode
command to configure the PoE mode on the current port.
Use the
undo poe mode
command to restore the default PoE mode on current port.
By default, the port adopts signal lines to supply power.
Caution:
Quidway S8500 series routing switches currently do not support the spare mode. If a
PD only supports the spare mode, a conversion will be needed.
Example
# Configure the PoE mode on current port to signal.
[Quidway-GigabitEthernet3/1/1] poe mode signal
1.1.9 poe priority
Syntax
poe priority
{
critical
|
high
|
low
}
undo poe priority
