Command Manual – MPLS
Quidway S8500 Series Routing Switches
Chapter 1 MPLS Basic Configuration Commands
Huawei Technologies Proprietary
1-9
undo static-lsp egress lsp-name
View
MPLS view
Parameter
lsp-name
: LSP name
interface-type Interface-number
: Interface type, interface number.
in-label-value
: Value of inbound label, ranging 3 (implicit empty label) and from 16 to
1023.
Description
Use the
static-lsp egress
command to configure a static LSP for an egress LSR.
Use the
undo static-lsp egress
command to delete an LSP for an egress LSR.
Related command:
static-lsp ingress
,
static-lsp transit
and
debugging mpls
.
Example
# Configure a static LSP named bj-sh on the egress LSR.
<Quidway>system-view
[Quidway-mpls] static-lsp egress bj-sh incoming-interface vlan-interface 201
in-label 233
1.1.12 static-lsp ingress
Syntax
static-lsp ingress lsp-name
{
destination dest-addr
{
addr-mask
|
mask-length
} |
l2vpn
}
nexthop next-hop-addr
} }
out-label out-label-value
undo static-lsp ingress
lsp-name
View
MPLS view
Parameter
lsp-name
: LSP name
dest-addr
: Destination IP address.
addr-mask
: Destination IP address mask.
mask-length
: Mask length of destination IP address
next-hop-addr
: Next-hop address.
