Command Manual – Port
Quidway S8500 Series Routing Switches
Chapter 4 RPR Port Configuration Commands
Huawei Technologies Proprietary
4-25
View
PRP logical port view
Parameter
atd
value
: Ranges from 1 to 10 (in seconds).
fdd
value
: Ranges from 10 to 1,000 (in milliseconds).
holdoff
value
: Ranges from 0 to 200 (in milliseconds), in steps of 10 milliseconds.
stability
value
: Ranges from 10 to 100 (in milliseconds), in steps of 1 millisecond.
tp
-
fast
value
: TP fast timer value, in the range of 1 to 20 (in milliseconds).
tp
-
slow
value
: TP slow timer value, in the range of 50 to 1,000 (in milliseconds).
tc
-
fast
value
: TC fast timer value, in the range of 1 to 20 (in milliseconds).
tc
-
slow
value
: TC slow timer value, in the range of 50 to 1,000 (in milliseconds).
wtr
value
: WTR timer value, in the range of 0 to 1,440 (in seconds). By default, it is 10
seconds.
Description
Use the
rpr timer atd
command to set the value of the timer for sending ATD frames
and other frames periodically. The value range is 1 to 10 (in seconds). The default value
is 1 second.
Use the
undo rpr timer
command to restore the default timer value.
Example
# Set the timer for sending ATD frames to 3 seconds.
<Quidway> system-view
[Quidway] interface RPR2/1/1
[Quidway-RPR2/1/1] rpr timer atd 3
4.1.25 rpr weight
Syntax
rpr
weight
{
ringlet0
|
ringlet1
}
value
undo rpr
weight
{
ringlet0
|
ringlet1
}
View
RPR logical port view
Parameter
ringlet0
: Configures node weight on Ringlet0.
Ringlet1
: Configures node weight on Ringlet1.
