FusionModule1000B Water-Cooled IT Solution
Commissioning Guide
9 Commissioning Core Components
Issue 02 (2017-01-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
88
Figure 9-7
Teamwork setting screen 2
Table 9-8
Teamwork setting description
Paramete
r
Description
Configuration Principle
Teamwork
unit no.
A maximum of four groups (1 to 4)
can be set.
Group precision air conditioners in
adjacent areas as one, that is, assign
one group number for them.
Teamwork
unit
address
Indicates the address (1 to 32) of a
precision air conditioner in a group.
Addresses in the same group must
be unique, and the address of the
master unit must be set to 1.
Set the value to an integer in the
range from 1 to the number of
devices in the current group. If the
address of a device exceeds the
range, the device cannot enter the
teamwork group.
If an address in the range is not
configured, the teamwork topology
shows that this device is offline.
Teamwork
function
Indicates whether to disable or
enable the teamwork function.
Disable: A unit operates
independently.
Enable, a unit operates in team
with other units.
Set this parameter based on the onsite
device heat distribution.
Network
Indicates the networking mode for
the teamwork.
Set this parameter to CAN.
Total
number of
units
Indicates the number of precision air
conditioners in a group. The value is
an integer ranging from 1 to 32.
Set this parameter to the number of
precision air conditioners in a group.