manualshive.com logo in svg

Huawei 5288 V3 V100R003, User Manual

Share
Download
Huawei 5288 V3 V100R003 User Manual Download Page 202

Figure 7-77

 Installing a heat sink

Step 14

Use a Phillips screwdriver to tighten one pair of diagonally opposite screws on the heat sink
halfway and then tighten the other pair of screws. See step (2) in 

Figure 7-77

.

Step 15

Install the air duct. For details, see 

7.14 Installing the Air Duct

.

Step 16

Install the chassis cover. For details, see 

7.12 Installing the Chassis Cover

.

Step 17

Install the 5288 V3. For details, see 

3.4 Installing the Server

.

Step 18

Connect all internal cables such as power and network cables. For details, see 

3.5 Connecting

External Cables

.

Step 19

Power on the 5288 V3. For details, see 

4.1 Powering On the Server

.

----End

7.39 Removing a DIMM

Remove a DIMM before replacing it with a new one.

Procedure

Step 1

Wear an ESD wrist strap. For details, see 

1 Safety Instructions

.

Step 2

Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.

Step 3

Power off the 5288 V3. For details, see 

4.2 Powering Off the Server

.

Step 4

Remove all external cables such as power and network cables.

5288 V3 Server
User Guide

7 Replacing Parts

Issue 26 (2018-11-19)

Copyright © Huawei Technologies Co., Ltd.

192

Summary of Contents for 5288 V3 V100R003










































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands