manualshive.com logo in svg

Huawei 5288 V3 V100R003, User Manual

Share
Download
Huawei 5288 V3 V100R003 User Manual Download Page 165

Step 2

Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.

Step 3

Power off the 5288 V3. For details, see 

4.2 Powering Off the Server

.

Step 4

Remove all external cables such as power and network cables.

Step 5

Remove the 5288 V3 and put it on an ESD desktop. For details, see 

3.6 Removing the

Server

.

Step 6

Remove the chassis cover. For details, see 

7.11 Removing the Chassis Cover

.

Step 7

Lift the riser card tray. See 

Figure 7-40

.

Figure 7-40

 Removing a riser card tray

Step 8

Remove the PCIe cards from the riser card tray. For details, see 

7.21.1 Removing a PCIe

Card from a Riser Card

.

Step 9

Loosen the screw on the riser card. See step (1) in 

Figure 7-41

.

5288 V3 Server
User Guide

7 Replacing Parts

Issue 26 (2018-11-19)

Copyright © Huawei Technologies Co., Ltd.

155

Summary of Contents for 5288 V3 V100R003










































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands