manualshive.com logo in svg

Huawei 5288 V3 V100R003, User Manual

Share
Download
Huawei 5288 V3 V100R003 User Manual Download Page 3

About This Document

Purpose

This document describes the appearance, features, and specifications of the 5288 V3 and
explains how to install and remove the server and its parts, power on and off, configure, and
troubleshoot the server.

Read this document before operating the 5288 V3.

Intended Audience

This document is intended for:

l

Technical support engineers

l

Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to
personal injury.

5288 V3 Server
User Guide

About This Document

Issue 26 (2018-11-19)

Copyright © Huawei Technologies Co., Ltd.

ii

Summary of Contents for 5288 V3 V100R003










































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands