manualshive.com logo in svg

Huawei 5288 V3 V100R003, User Manual

Share
Download
Huawei 5288 V3 V100R003 User Manual Download Page 188

Step 2

Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.

Step 3

Power off the 5288 V3. For details, see 

4.2 Powering Off the Server

.

Step 4

Remove all external cables such as power and network cables.

Step 5

Remove the 5288 V3 and put it on an ESD desktop. For details, see 

3.6 Removing the

Server

.

Step 6

Remove the chassis cover. For details, see 

7.11 Removing the Chassis Cover

.

Step 7

Remove the riser card tray above the RAID controller card. For details, see 

7.19 Removing

the Riser Card

.

Step 8

Locate the supercapacitor, which is in one of the four positions shown in 

Figure 7-63

.

Figure 7-63

 Supercapacitor positions

Step 9

Determine the position and chip model of the RAID controller card connected to the
supercapacitor to be removed.

If the chip model of the RAID controller card connected to the supercapacitor to be removed
is LSI SAS3108, remove the trans flash module (TFM) first.

5288 V3 Server
User Guide

7 Replacing Parts

Issue 26 (2018-11-19)

Copyright © Huawei Technologies Co., Ltd.

178

Summary of Contents for 5288 V3 V100R003










































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands