Huawei 5288 V3 V100R003 User Manual Download Page 131

Page: 131 / 297

Front hard disk backplane

Rear hard disk backplane

PSU backplane

Front mounting ear plate

M.2 SATA SSD card

NOTE

The preceding parts are for reference only. Actual replaceable parts may differ.

7.2 Tool Preparations

Prepare the following tools before replacing components:

Finger cots

Protective gloves

Flat-head screwdriver

M3 Phillips screwdriver

ESD gloves or ESD wrist strap

Packaging materials, for example, an ESD bag

7.3 (Optional) Removing the Front Bezel

Remove the front bezel before removing front panel components (such as hard disks) or left
and right mounting ears.

The front bezel is installed on the front panel and comes with a security lock to prevent
unauthorized operations on hard disks.

Procedure

Step 1

Wear an ESD wrist strap. For details, see

1 Safety Instructions

Step 2

Unlock the front bezel by turning the key clockwise, and remove the key for proper storage.
See

Figure 7-1

5288 V3 Server
User Guide

7 Replacing Parts

Issue 26 (2018-11-19)

121

Summary of Contents for 5288 V3 V100R003










































































































































































































































































































Search results

Summary of Contents for 5288 V3 V100R003

Reviews:

Brands by name

Popular brands

Huawei 5288 V3 V100R003, User Manual

Search results

Summary of Contents for 5288 V3 V100R003

Reviews:

Brands by name

Popular brands