manualshive.com logo in svg

Huawei 5288 V3 V100R003, User Manual

Share
Download
Huawei 5288 V3 V100R003 User Manual Download Page 152

----End

7.14 Installing the Air Duct

Install an air duct to replace the original one or after replacing a CPU, DIMM, or
supercapacitor.

Procedure

Step 1

Wear an ESD wrist strap. For details, see 

1 Safety Instructions

.

Step 2

Remove the air duct to be replaced. For details, see 

7.13 Removing the Air Duct

.

Step 3

Take the spare air duct out of its ESD bag.

Step 4

Align the positioning pin on the air duct with the fixing hole by following instructions on the
chassis and place the air duct downwards so that the pins on four corners of the air duct fit
into the dents on the chassis. See 

Figure 7-27

.

Figure 7-27

 Installing the air duct

Step 5

Optional: 

Install the supercapacitor tray on the air duct in the arrow direction. See 

Figure

7-28

.

5288 V3 Server
User Guide

7 Replacing Parts

Issue 26 (2018-11-19)

Copyright © Huawei Technologies Co., Ltd.

142

Summary of Contents for 5288 V3 V100R003










































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands