Huawei 5288 V3 V100R003 User Manual Download Page 157

Page: 157 / 297

7.17 Removing an Internal Cable

Remove an internal cable before replacing it with a new one.

Procedure

Step 1

Wear an ESD wrist strap. For details, see

1 Safety Instructions

Step 2

Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.

Step 3

Power off the 5288 V3. For details, see

4.2 Powering Off the Server

Step 4

Remove all external cables such as power and network cables.

Step 5

Remove the 5288 V3 and put it on an ESD desktop. For details, see

3.6 Removing the

Server

Step 6

Remove the chassis cover. For details, see

7.11 Removing the Chassis Cover

Step 7

Determine the cable to be removed. For details, see

2.7 Internal Cabling

Step 8

Remove the air duct. For details, see

7.13 Removing the Air Duct

Step 9

Vertically lift a fan module until it is disconnected from the mainboard. See

Figure 7-32

. Use

the same method to remove the other fan modules.

5288 V3 Server
User Guide

7 Replacing Parts

Issue 26 (2018-11-19)

147

Summary of Contents for 5288 V3 V100R003










































































































































































































































































































Search results

Summary of Contents for 5288 V3 V100R003

Reviews:

Brands by name

Popular brands

Huawei 5288 V3 V100R003, User Manual

Search results

Summary of Contents for 5288 V3 V100R003

Reviews:

Brands by name

Popular brands