Huawei 5288 V3 V100R003 User Manual Download Page 181

Page: 181 / 297

Procedure

Step 1

Wear an ESD wrist strap. For details, see

1 Safety Instructions

Step 2

Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.

Step 3

Power off the 5288 V3. For details, see

4.2 Powering Off the Server

Step 4

Remove all external cables such as power and network cables.

Step 5

Remove the 5288 V3 and put it on an ESD desktop. For details, see

3.6 Removing the

Server

Step 6

Remove the chassis cover. For details, see

7.11 Removing the Chassis Cover

Step 7

Remove full-height full-length riser cards if they are installed. For details, see

7.19 Removing

the Riser Card

Step 8

Remove the supercapacitor if it is installed. For details, see

7.33 Removing the

Supercapacitor (RAID Controller Card)

Step 9

Determine the position for installing the RAID controller card. See

Figure 7-57

Position of the RAID controller card

Step 10

Hold down the latches on the cables to the RAID controller card, and remove the cables from
the RAID controller card. For details, see

2.7 Internal Cabling

Step 11

Loosen the screws on the RAID controller card. See step (1) in

Figure 7-58

5288 V3 Server
User Guide

7 Replacing Parts

Issue 26 (2018-11-19)

171

Summary of Contents for 5288 V3 V100R003










































































































































































































































































































Search results

Summary of Contents for 5288 V3 V100R003

Reviews:

Brands by name

Popular brands

Huawei 5288 V3 V100R003, User Manual

Search results

Summary of Contents for 5288 V3 V100R003

Reviews:

Brands by name

Popular brands