Huawei 5288 V3 V100R003, User Manual

Page: 20 / 297

19 Management network port (Mgmt) 20 Rear hard disk (numbered 24 to 31
from left to right and from top to
bottom)
21 LAN on motherboard – –
l You can configure two rear 2.5-inch or 3.5-inch hard disks in position 1 shown in Figure
2-4 . The hard disks are numbered A0 and B0 from top to bottom.
l You can configure one riser card and two rear 2.5-inch hard disks, or two rear 3.5-inch
hard disks on I/O module in position 7 shown in
Figure 2-4 . The hard disks are
numbered A1 and B1 from top to bottom.
I/O module supports only one riser card if the server with dual-CPU configuration is not
equipped with rear hard disks. One riser card provides two or three PCIe slots.
l You can configure a GE or 10GE flexible NIC in position 20 in Figure 2-4 .
Flexible NICs
The 5288 V3 supports the following models of LANs on motherboard (flexible NICs):
l SM211: provides two GE electrical ports.
l SM210/SM212: provides four GE electrical ports.
l
SM233: provides two 10GE electrical ports.
l SM231: provides two 10GE optical ports.
NOTE
For details about the flexible NICs supported by the 5288 V3, see Huawei Server Compatibility
Checker .
The following figures show flexible NIC ports and indicators.
Figure 2-5 SM211 ports and indicators
1 Data transmission status
indicator 2 Connection status indicator
Figure 2-6 SM210 or SM212 ports and indicators
5288 V3 Server
User Guide
2 Product Overview
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 10