manualshive.com logo in svg

Huawei 5288 V3 V100R003, User Manual

Share
Download
Huawei 5288 V3 V100R003 User Manual Download Page 262

Client OS
Type

Client OS Version

Management Software

Windows Server 2008 R2 32-bit or
64-bit

Windows Server 2012 64-bit

Ubuntu

Ubuntu 14.04 LTS

Ubuntu 16.04 LTS

Mac

Mac OS X El Capitan

 

Ensure that the following requirements are met before logging in to the real-time desktop of a
server:

l

The client (for example, a PC) is connected to the iBMC management network port of
the server to be accessed.

l

You have obtained the iBMC management network port IP address and port number
(HTTPS port number).

l

You have obtained the user name and password for logging in to iBMC.

l

You have downloaded the Independent Remote Console software package to a client,
such as a PC, and decompressed the package.
Download link: 

Independent Remote Console

NOTE

l

kvm_client_windows.zip

 is for Windows OSs.

l

kvm_client_ubuntu.zip

 is for Ubuntu OSs.

l

kvm_client_mac.zip

 is for Mac OSs.

Procedure

l

Logging In to a Server Using the Independent Remote Console (Windows)

a.

Configure an IP address for the client (PC) to enable communication between the
client and the iBMC. That is, the IP address configured and the iBMC management
network port IP address must be in the same network segment.

b.

Double-click 

KVM.exe

. The independent remote console interface is displayed, as

shown in 

Figure 9-6

.

5288 V3 Server
User Guide

9 Common Operations

Issue 26 (2018-11-19)

Copyright © Huawei Technologies Co., Ltd.

252

Summary of Contents for 5288 V3 V100R003










































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands