Huawei 5288 V3 V100R003 User Manual Download Page 125

Page: 125 / 297

Preparing for the upgrade

Upgrade Package

Document

Download a driver or firmware upgrade
package of the required version. The
following are upgrade package examples:

iBMC management software: 5288 V3-
iBMC-V191.zip

BIOS firmware: 5288 V3-BIOS-
V169.zip

Driver: FusionServer iDriver-Windows-
Driver-V304.zip

RAID controller card firmware:
FusionServer-RAID card-FW-V101.zip

Download path:

Support > Downloads >

IT > Server > FusionServer > Rack
Server

Release Notes

HUAWEI Server Firmware Upgrade
Guide

FusionServer Tools V100R002 uMate
User Guide

HUAWEI Rack Server Upgrade Guide
(iBMC)

Driver Version Mapping

Download path:

Support > Downloads >

IT > Server > FusionServer > Rack
Server

Upgrading Firmware or Management Software

Upgrade server firmware or management software using one of the following methods:

Upgrade iBMC using the iBMC WebUI.

Obtain the upgrade package from

http://e.huawei.com/en/

System

Firmware Upgrade

The

Firmware Upgrade

page is displayed.

In the

Firmware Upgrade

area, click

Browse

. In the displayed dialog box, select

the local directory for storing the upgrade package

image.hpm

Click

Open

The

Firmware Upgrade

page is displayed.

Select

Immediately restart automatically

Click

Start Update

Click

Yes

After the OS is restarted, log in to the iBMC WebUI again.

Repeat

to upgrade the originally active image of iBMC.

For details, see

HUAWEI Rack Server Upgrade Guide (iBMC)

Upgrade the BIOS using the iBMC WebUI.

Obtain the upgrade package from

http://e.huawei.com/en/

System

Firmware Upgrade

The

Firmware Upgrade

page is displayed.

In the

Firmware Upgrade

area, click

Browse

. In the displayed dialog box, select

the local directory for storing the upgrade package

biosimage.hpm

Click

Open

5288 V3 Server
User Guide

6 Software and Configuration Utility

Issue 26 (2018-11-19)

115

Summary of Contents for 5288 V3 V100R003










































































































































































































































































































Search results

Summary of Contents for 5288 V3 V100R003

Reviews:

Brands by name

Popular brands

Huawei 5288 V3 V100R003, User Manual

Search results

Summary of Contents for 5288 V3 V100R003

Reviews:

Brands by name

Popular brands