manualshive.com logo in svg

Huawei 5288 V3 V100R003, User Manual

Share
Download
Huawei 5288 V3 V100R003 User Manual Download Page 88

Figure 3-28

 Connecting a power cable (secured with the PSU using a velcro strap)

l

If the PSU has a plastic clip, perform the following steps to connect the power cable:

a.

Open the plastic clip and place the power cable in the plastic clip. See step (1) in

Figure2 Connecting a power cable (secured with the PSU using a plastic clip)

.

Then close the plastic clip. See step (2) in 

Figure2 Connecting a power cable

(secured with the PSU using a plastic clip)

.

Figure 3-29

 Connecting a power cable (secured with the PSU using a plastic clip)

b.

Open the lock of the plastic clip. See a of step (3) in 

Figure2 Connecting a power

cable (secured with the PSU using a plastic clip)

. Slide the plastic clip towards

the PSU socket to ensure that the plastic clip is close to the connector of the power
cable. See b of step (3) in 

Figure2 Connecting a power cable (secured with the

PSU using a plastic clip)

.

Step 3

Insert the other end of the AC power cable into the AC power socket on the cabinet. The AC
power socket is located horizontally at the rear of the cabinet. Select a jack on the power
socket for connection.

Step 4

Bind the power cable to the cable trough using cable ties.

----End

5288 V3 Server
User Guide

3 Installing and Removing the 5288 V3

Issue 26 (2018-11-19)

Copyright © Huawei Technologies Co., Ltd.

78

Summary of Contents for 5288 V3 V100R003










































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands