8.
If removed,
install the NVMe M.2 enablement board.
9.
For 2U server blade, do the following:
10. Install the server blade in the chassis.
11. Power up the server blade.
Memory options
IMPORTANT: This server does not support mixing LRDIMMs and RDIMMs. Attempting to mix any combination of these
DIMMs can cause the server to halt during BIOS initialization. All memory installed in the server must be of the same
type.
DIMM-processor compatibility
The installed processor determines the type of DIMM that is supported in the server blade. Intel Xeon processors support
DDR4-2933 DIMMs. Mixing DIMM types is not supported. Install only the supported DDR4-2666 or DDR4-2933 DIMMs in the
server blade.
DIMM type
Intel Xeon G-6248 processor is optimized for:
• Single-rank and dual-rank PC4-2933 (DDR4-2933) RDIMMs operating at up to 2933 MT/s
• Dual-rank and quad-rank PC4-2933 (DDR4-2933) LRDIMMs operating at up to 2933 MT/s
Hardware options installation
37
Summary of Contents for ProLiant e910
Page 148: ...148 Customer self repair...
Page 149: ...Customer self repair 149...
Page 150: ...150 Customer self repair...
