• Plastic retention clips (2)
• M.2 SATA SSD modules
Procedure
1.
2.
Remove the server blade from the chassis.
3.
For 2U server blade, do the following:
4.
If installed, remove the NVMe M.2 SSD module.
5.
Reinstall the M.2 screw, removed when removing the NVMe M.2 SSD.
6.
Install the retention clips:
a. Insert the retention clip with the spring facing the front panel of the server blade.
b. Twist the retention clip 90° clockwise, until it locks in position.
30 Hardware options installation
Summary of Contents for ProLiant e910
Page 148: ...148 Customer self repair...
Page 149: ...Customer self repair 149...
Page 150: ...150 Customer self repair...
