HPE ProLiant e910 User And Maintenance Manual Download Page 94

Page: 94 / 182

Removing a task from the installation queue

Prerequisites

Configure iLO Settings privilege

Procedure

1. Click Firmware & OS Software in the navigation tree, and then click Installation Queue.

2. Click the remove component icon .

iLO prompts you to confirm the request.

3. Click Yes, remove.

The component is removed.

Removing all tasks from the installation queue

Prerequisites

• Configure iLO Settings privilege

• The component is not in an install set.

• The component is not part of a queued task.

Procedure

1. Click Firmware & OS Software in the navigation tree, and then click the Installation Queue tab.

2. Click Remove all.

iLO prompts you to confirm the request.

3. Click Yes, remove.

The tasks are removed.

Viewing the installation queue

The

Installation Queue page displays summary information for each queued task, and you can click an individual task for

more information. The current

iLO Date/Time value is displayed at the top of the page.

Procedure

1. Click Firmware & OS Software in the navigation tree, and then click the Installation Queue tab.

2. (Optional) To view detailed information, click an individual task.

Queued task summary details

State

Status of the task. The possible values follow:

94 Using HPE iLO 5

Summary of Contents for ProLiant e910























































































































































































Search results

Summary of Contents for ProLiant e910

Reviews:

Related manuals for ProLiant e910

Brands by name

Popular brands

HPE ProLiant e910, User And Maintenance Manual

Search results

Summary of Contents for ProLiant e910

Reviews:

Related manuals for ProLiant e910

Brands by name

Popular brands