HP StorageWorks NAS 1000s Administration Manual Download Page 95

Page: 95 / 172

Folder and Share Management

NAS 1000s Administration Guide

Figure 50: Create a New Share dialog box, General tab

2. Enter the following information:

■

Share name

■

Share path

■

Client protocol types

To create a folder for the new share, check the indicated box and the system will create the
folder at the same time it creates the share.

Protocol specific tabs are available to enter sharing and permissions information for each
sharing type. See "Modifying Share Properties" for detailed information on these tabs.

3. After entering all share information, click OK.

Deleting a Share

Caution:

Before deleting a share, warn all users to exit that share and confirm that no one

is using the share.

To delete a share:

1. From the Shares menu, click Delete.

2. Verify that this is the correct share, and then click OK.

Note:

This option deletes only the share. The resource is not deleted.

Summary of Contents for StorageWorks NAS 1000s













































































































































































Search results

Summary of Contents for StorageWorks NAS 1000s

Reviews:

HP StorageWorks NAS 1000s, Administration Manual, Page: 95 / 172

Search results

Summary of Contents for StorageWorks NAS 1000s

Reviews: