manualshive.com logo in svg

HP StorageWorks NAS 1000s, Administration Manual, Page: 153 / 172

Share
Download
HP StorageWorks NAS 1000s Administration Manual Download Page 153

153

NAS 1000s Administration Guide

A

Backup Management

This appendix is a backup guide for HP StorageWorks NAS devices. This appendix guides the 
reader through the process of determining which backup and restore solution is best suited to 
the NAS device and their business environment.

As a source and a destination for departmental, workgroup, and enterprise data, the NAS 
1000s becomes an integral part of company computing environments. Therefore, efficient 
backup and reliable restore capabilities are a priority.

This appendix provides pointers for setting up and maintaining reliable backups, including:

■

Backup solutions

■

Best practices

Backup Solutions

There are three main considerations when developing a backup solution:

■

System environments

■

Hardware options

■

Software options

System Environments

In many departmental and workgroup situations, it is common to connect a tape backup device 
directly to the NAS device, using a SCSI connection. In this scenario, the server has exclusive 
use of the tape device. HP has several tape solutions with wide industry acceptance available 
for use with the NAS 1000s. 

The NAS device is deployed into a SCSI direct connect environment.

SCSI Direct Connect Environments

The NAS device may be directly connected to a large tape library using an optional SCSI tape 
controller. The optional High Voltage Differential (HVD) or Low Voltage Differential (LVD) 
controllers have two SCSI busses, each capable of supporting up to two DLT 7000 (35/70 GB) 
devices, for a total of four tape drive devices.

Summary of Contents for StorageWorks NAS 1000s













































































































































































Reviews:

No comments