HP StorageWorks NAS 1000s Administration Manual Download Page 76

Page: 76 / 172

User and Group Management

NAS 1000s Administration Guide

Figure 36: New Quota Entry dialog box

3. Indicate the user that the quota is for. For local users and groups, select the desired user

from the Select a local user box. For users on the domain, enter the user's domain account
name in the indicated box.

4. Enter a disk space limit.

5. Verify the accuracy of the field entries, and then click OK. The Quota Entries dialog box

is displayed again.

Deleting Quota Entries for a User or Group

To delete quotas for a user or group:

1. From the WebUI, select Disks, Disk Quotas. In the Volumes and Quotas dialog box,

select a volume and then click Quota Entries. The Quota Entries dialog box is
displayed.

2. All users and groups with established quotas are displayed. To delete a quota for a user or

group, click Delete. A verification dialog box is displayed.

3. Verify that this is the correct user, and then click OK. The Quota Entries dialog box is

displayed again.

Modifying Quota Entries for a User or Group

Usage limit parameters for a user's quota can be changed. To modify these user quota settings:

1. From the WebUI, select Disks, Disk Quotas. In the Volumes and Quotas dialog box,

select a volume and then click Quota Entries. The Quota Entries dialog box is
displayed.

2. All users and groups with established quotas are displayed. To modify quota for a user or

group, select a user, and then click Properties. The Quota Entry dialog box for that user
is displayed.

Summary of Contents for StorageWorks NAS 1000s













































































































































































Search results

Summary of Contents for StorageWorks NAS 1000s

Reviews:

HP StorageWorks NAS 1000s, Administration Manual, Page: 76 / 172

Search results

Summary of Contents for StorageWorks NAS 1000s

Reviews: