manualshive.com logo in svg

HP StorageWorks NAS 1000s, Administration Manual, Page: 48 / 172

Share
Download
HP StorageWorks NAS 1000s Administration Manual Download Page 48

Persistent Storage Manager

48

NAS 1000s Administration Guide

Inactive time-out

This option specifies how long the server should try to create a snapshot. A snapshot will not 
begin until a period of relative inactivity set by the Inactive period has passed. If an interval 
passes that is longer than the Inactive time-out period, the snapshot will not be created and a 
notice generated to the system event log. 

Image directory

This option specifies the root directory used for the snapshot. Each snapshot appears as a 
subdirectory of the volume that is being imaged. The entire content of the volume as it existed 
at the moment the snapshot was created will appear under this directory. 

Restore Defaults

The Restore Defaults button will reset the system defaults.

Volume Settings

From the PSM screen select Volume Settings. From the Volume Settings screen you can view 
the Persistent Storage Manager attributes for each volume and change volume settings using 
the Configure button in the Tasks list. 

Figure 12:  Volume settings

Available Volume

This field lists all of the volumes that can support snapshots. You can select the volume you 
want to configure.

Summary of Contents for StorageWorks NAS 1000s













































































































































































Reviews:

No comments