manualshive.com logo in svg

HP StorageWorks NAS 1000s, Administration Manual, Page: 141 / 172

Share
Download
HP StorageWorks NAS 1000s Administration Manual Download Page 141

NetWare File System Management

141

NAS 1000s Administration Guide

Figure 82:  Create a New Share dialog box, General tab

2. In the General tab, enter the share name and path. Check the Novell NetWare client 

protocol checkbox.

To create a folder for the share, check the indicated box and the system will create the 
folder when it creates the share.

3. Select the NetWare Sharing tab to enter NCP specific information. See "Modifying Share 

Properties" for information on this tab.

4. After all share information is entered, click OK.

Deleting an NCP Share

Caution:  

Before deleting a share, warn all users to exit that share. Then confirm that no one 

is using the share.

To delete a share:

1. From the Shares menu, click Delete.

2. Verify that this is the correct share and click OK.

Summary of Contents for StorageWorks NAS 1000s













































































































































































Reviews:

No comments