manualshive.com logo in svg

HP StorageWorks NAS 1000s, Administration Manual, Page: 15 / 172

Share
Download
HP StorageWorks NAS 1000s Administration Manual Download Page 15

About this Guide

15

NAS 1000s Administration Guide

Rack Stability

Rack stability protects personal and equipment.

WARNING:  

To reduce the risk of personal injury or damage to the equipment, be sure that:

■

The leveling jacks are extended to the floor.

■

The full weight of the rack rests on the leveling jacks.

■

In single rack installations, the stabilizing feet are attached to the rack.

■

In multiple rack installations, the racks are coupled.

■

Only one rack component is extended at any time. A rack may become unstable if more 

than one rack component is extended for any reason.

Getting Help

If you still have a question after reading this guide, contact an HP authorized service provider 
or access our website: 

http://www.hp.com

.

HP Technical Support

In North America, call technical support at 1-800-652-6672, available 24 hours a day, 7 days a 
week.

Note:  

For continuous quality improvement, calls may be recorded or monitored.

Outside North America, call technical support at the nearest location. Telephone numbers for 
worldwide technical support are listed on the HP website under support: 

http://www.hp.com.

.

Be sure to have the following information available before calling:

■

Technical support registration number (if applicable)

■

Product serial numbers

■

Product model names and numbers

■

Applicable error messages

■

Operating system type and revision level

■

Detailed, specific questions

Summary of Contents for StorageWorks NAS 1000s













































































































































































Reviews:

No comments