HP StorageWorks NAS 1000s Administration Manual Download Page 34

Page: 34 / 172

Setup Completion and Basic Administrative Procedures

NAS 1000s Administration Guide

Shutting Down or Restarting the Server

Caution:

Notify users before powering down the system. Both UNIX and Windows NT users

can be drastically affected if they are not prepared for a system power-down.

1. From the NAS 1000s WebUI, select Maintenance, Shutdown. Several options are

displayed: Restart, Shut Down, and Scheduled Shutdown.

Figure 6: Shutdown menu

To shut down and automatically restart the server, click Restart.

To shut down and power off the server, click Shut Down.

To schedule a shutdown, click Scheduled Shutdown.

2. Regardless of the choice, a confirmation prompt is displayed. After verifying that this is

the desired action, click OK. Several status messages are displayed during the shutdown
process.

Summary of Contents for StorageWorks NAS 1000s













































































































































































Search results

Summary of Contents for StorageWorks NAS 1000s

Reviews:

HP StorageWorks NAS 1000s, Administration Manual, Page: 34 / 172

Search results

Summary of Contents for StorageWorks NAS 1000s

Reviews: