HP StorageWorks NAS 1000s Administration Manual Download Page 27

Page: 27 / 172

NAS 1000s Administration Guide

Setup Completion and Basic

Administrative Procedures

This chapter continues the process of setting up the system that was started using the HP
StorageWorks NAS 1000s Quick Start Guide by discussing additional setup procedures and
options.

Basic system administration functions are also included in this chapter.

Unless otherwise instructed, all procedures are performed using the NAS Web Based User
Interface (WebUI).

The following topics are included in this chapter:

■

Setup completion

— Managing system storage

— Creating and managing users and groups

— Creating and managing file shares

— Installing and configuring data replication software

■

Basic administrative procedures

— Setting the system date and time

— Powering down and restarting the server

— Viewing and maintaining audit logs

— Using terminal services

— Setting up email alerts

— Updating the software

— Changing system network settings

Summary of Contents for StorageWorks NAS 1000s













































































































































































Search results

Summary of Contents for StorageWorks NAS 1000s

Reviews:

HP StorageWorks NAS 1000s, Administration Manual, Page: 27 / 172

Search results

Summary of Contents for StorageWorks NAS 1000s

Reviews: