HP StorageWorks NAS 1000s Administration Manual Download Page 29

Page: 29 / 172

Setup Completion and Basic Administrative Procedures

NAS 1000s Administration Guide

Creating and Managing File Shares

Files shares must be set up, granting and controlling file access to users and groups. See
Chapter 5, Folder and Share Management for complete information on managing file shares.

The following information is included:

■

Folder Management

— Navigating to a specific volume or folder

— Creating a new folder

— Deleting a folder

— Modifying folder properties

— Creating a new share for a volume or folder

— Managing shares for a volume or folder

— Managing file level permissions

■

Share Management

— Share considerations

— Defining Access Control Lists

— Integrating local file system security into Windows domain environments

— Comparing administrative (hidden) and standard shares

— Planning for compatibility between file sharing protocols

— Managing shares

■

Protocol parameter settings

UNIX specific information is discussed in Chapter 6, UNIX File System Management.

Summary of Contents for StorageWorks NAS 1000s













































































































































































Search results

Summary of Contents for StorageWorks NAS 1000s

Reviews:

HP StorageWorks NAS 1000s, Administration Manual, Page: 29 / 172

Search results

Summary of Contents for StorageWorks NAS 1000s

Reviews: