manualshive.com logo in svg

HP StorageWorks NAS 1000s, Administration Manual, Page: 102 / 172

Share
Download
HP StorageWorks NAS 1000s Administration Manual Download Page 102

Folder and Share Management

102

NAS 1000s Administration Guide

2. Protocols and their statuses are listed. The following options are available:

■

Enabling a protocol

■

Disabling a protocol

■

Modifying Protocol Settings

Because enabling and disabling a protocol are self explanatory, only modifying protocol 
specific settings is described in this section.

CIFS Protocol Settings

There are no user configurable settings for CIFS.

NFS Protocol Settings

NFS is the networking protocol for exporting UNIX file systems across a network. UNIX and 
NFS are discussed in Chapter 6, UNIX File System Management.

Some of the NFS protocol settings include:

■

Async/Sync Settings

■

Locks

■

Client Groups

■

User and Group Mappings

FTP Protocol Settings

Three tabs are presented in the FTP Protocol Properties dialog box: Logging, Anonymous 
Access, and Messages.

Within these tabs:

■

Logging—Enable logging

■

Anonymous Access—Enable anonymous access

■

Messages—Enter a welcome and an exit message

HTTP Protocol Settings

The following parameters can be set for Web protocols:

■

Indicate which IP addresses can be used to access data shares

■

Indicate which port can be used to access data shares

NCP (NetWare) Protocol Settings

There are no user configurable settings for NCP. 

Summary of Contents for StorageWorks NAS 1000s













































































































































































Reviews:

No comments