manualshive.com logo in svg

HP StorageWorks NAS 1000s, Administration Manual, Page: 26 / 172

Share
Download
HP StorageWorks NAS 1000s Administration Manual Download Page 26

System Overview

26

NAS 1000s Administration Guide

NAS Management Console

Click this icon to access the following folders:

■

Core Operating System is used to manage local users and groups, access performance 
logs and alerts, and manage the event viewer.

■

Disk System contains access to local disk management, including a volume list and a 
graphical view of the disks.

■

File Sharing contains modules for the configuration of file sharing exports. CIFS 
(Windows) and NFS (UNIX) file shares are managed through this folder.

■

System contains system summary information.

Data Copy

StorageWorks NAS Data Copy is a real time data replication and failover software product that 
augments existing data protection and tape backup strategies. This product is not intended to 
replace regular tape backups.

Download and install a free 30-day trial version of Data Copy from the software and driver 
link of the NAS 1000s product page. To access the NAS 1000s product page:

go to 

www.hp.com

 

1. select storage 

2. select network attached storage from the networked storage options.

3. select the NAS 1000s

4. select software and drivers

See Chapter 2, Setup Completion and Basic Administrative Procedures, for additional 
information.

Summary of Contents for StorageWorks NAS 1000s













































































































































































Reviews:

No comments