Remote Access Methods and Monitoring
151
NAS 1000s Administration Guide
Telnet Server
Telnet Server is a utility that lets users connect to machines, log on, and obtain a command
prompt remotely. Telnet Server is preinstalled on the NAS 1000s, but must be activated before
use.
Caution:
For security reasons, the Telnet Server must be restarted each time the server is
restarted.
Enabling Telnet Server
To enable Telnet Server, use Terminal Services to access a command line interface and enter
the following command:
net start tlntsvr
Configuring Telnet Server
To enter Telnet parameter settings, access the Telnet Server user interface. Use Terminal
Services to go to the NAS Management Console. Then select File Sharing, Services for
UNIX, Telnet Server.
In the Telnet Server UI, indicate the following:
■
Authentication information
■
Auditing information
■
Server Settings
■
Sessions information
Each of these topics is discussed in the following paragraphs.
Figure 89: Telnet Server interface screen
Authentication Information
The Authentication tab is used to select user authentication methods allowed by the Telnet
Server. The administrator determines what method of authentication is appropriate based on
work environment.
Summary of Contents for StorageWorks NAS 1000s
