manualshive.com logo in svg

HP StorageWorks MSA 2/8 - SAN Switch, Reference Manual

Share
Download
HP StorageWorks MSA 2/8 - SAN Switch Reference Manual Download Page 99

cfgClear

99

Fabric OS Version 3.1.x/4.1.x Reference Guide

Clear all zone configurations.

Synopsis

cfgClear

Availability

Admin

Release

V3.1.x and V4.1.x

Description

Use this command to clear all zone information in the transaction buffer. All 
defined zone objects in the transaction buffer are deleted. If an attempt is made to 
commit the empty transaction buffer while a zone configuration is enabled, a 
warning is displayed, to first disable the enabled zone configuration or to provide 
a valid configuration with the same name. 

After clearing the transaction buffer using the

 cfgClear 

command, use the

 

cfgDisable 

command to commit the transaction, and disable and clear the 

zone configuration in non-volatile memory for all the switches in the fabric, 
across reboots.

Note:  

This command requires an Advanced Zoning license.

When security is enabled, this command can only be issued from the Primary FCS 

switch. See “

Security Commands

” on page 941.

Operands

None.

cfgClear

Summary of Contents for StorageWorks MSA 2/8 - SAN Switch























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands