HP StorageWorks MSA 2/8 - SAN Switch, Reference Manual

Page: 276 / 982

Fabric OS Commands
276 Fabric OS Version 3.1.x/4.1.x Reference Guide
Remove members from a Fabric Assist mode zone.
Synopsis
fazoneRemove “fazoneName”,“member;member”
Availability
Admin
Release
V3.1.x and V4.1.x
Description
This command removes one or more members from an existing Fabric Assist
zone.
Each deleted member must be found by an exact string match. Order is important
when removing multiple members of a Fabric Assist zone. For example, if a
Fabric Assist zone contains “array2; array3; array4” then removing “array4;
array3” fails, but removing “array3; array4” succeeds. If issuing this command
results in all members being removed, the Fabric Assist zone is deleted.
Note: This command does not change the defined configuration (which you can view
using the
cfgShow
command) until the
cfgSave
command is issued. For the
change to become effective, an appropriate Fabric Assist zone configuration must be
enabled using the
cfgEnable
command. For the change to be preserved across
switch reboots, it must be saved to non-volatile memory using the
cfgSave
command.
When security is enabled, this command can only be issued from the Primary FCS
switch. See “ Security Commands ” on page 941.
fazoneRemove