manualshive.com logo in svg

HP StorageWorks MSA 2/8 - SAN Switch, Reference Manual

Share
Download
HP StorageWorks MSA 2/8 - SAN Switch Reference Manual Download Page 949

Glossary

949

Fabric OS Version 3.1.x/4.1.x Reference Guide

Boot Monitor

Code used to initialize the CP (control processor) environment after powering on. Identifies the 
amount of memory available and how to access it, and retrieves information about system buses.

Broadcast

The transmission of data from a single source to all devices in the fabric, regardless of zoning. 

See also multicast, unicast.

Buffer

-

to

-

buffer Flow Control

Management of the frame transmission rate in either a point-to-point topology or in an arbitrated 
loop. 

See also BB_Credit.

Cascade

Two or more interconnected Fibre Channel switches. StorageWorks 1 Gb SAN switches (running 
Fabric OS V2) and later can be cascaded up to 239 switches, with a recommended maximum of 
seven interswitch links (no path longer than eight switches). 

See also fabric, ISL.

Chassis

The metal frame in which the switch and switch components are mounted. 

Circuit

An established communication path between two ports. Consists of two virtual circuits capable of 
transmitting in opposite directions. 

See also link.

Class 1

Service that provides a dedicated connection between two ports (also called connection-oriented 
service), with notification of delivery or non-delivery.

Class 2

Service that provides multiplex and connectionless frame switching service between two ports, 
with notification of delivery or non-delivery. 

Class 3

Service that provides a connectionless frame switching service between two ports, without 
notification of delivery or non-delivery of data. This service can also be used to provide a multicast 
connection between the originator and recipients, with notification of delivery or non-delivery.

Summary of Contents for StorageWorks MSA 2/8 - SAN Switch























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands