manualshive.com logo in svg

HP StorageWorks MSA 2/8 - SAN Switch, Reference Manual

Share
Download
HP StorageWorks MSA 2/8 - SAN Switch Reference Manual Download Page 710

Fabric OS Commands

710

Fabric OS Version 3.1.x/4.1.x Reference Guide

Example

Create a new single MS_POLICY that enables access through a device that has 
WWN of 12:24:45:10:0a:67:00:40:

Create a new Front Panel policy that only enables Domains 3 and 4 to use the front 
panel:

Create a Device policy to allow 2 devices to attach to Domain 3 ports 1 and 3. The 
WWN of first device is 11:22:33:44:55:66:77:aa, and the WWN of second device 
is 11:22:33:44:55:66:77:bb:

Create a Telnet policy to allow anyone on the 192.168.5.0/24 network to access 
the fabric through sectelnet:

SCC_POLICY Members
This policy type requires member IDs be specified as WWN 

strings, Domains, or switch names. If Domain or switch names 

are used, the switches associated must be present in the fabric 

or the command fails.
To add all switches in the current fabric as members of the 

SCC_POLICY enter an asterisk “*” enclosed in quotation marks 

as the member value. This feature cannot be used by the other 

security telnet commands.

primaryfcs:admin> secpolicycreate “MS_POLICY”, “12:24:45:10:0a:67:00:40”
MS_POLICY has been created.
primaryfcs:admin>

primaryfcs:admin> secpolicycreate “FRONTPANEL_POLICY”, “3; 4”
FRONTPANEL_POLICY has been created.
primaryfcs:admin>

primaryfcs:admin> secpolicycreate “DCC_POLICY_aB_7”, 
“11:22:33:44:55:66:77:aa;11:22:33:44:55:66:77:bb;3[1,3]”
DCC_POLICY_abc has been created.
primaryfcs:admin>

primaryfcs:admin> secpolicycreate “TELNET_POLICY”, “192.168.5.0”
TELNET_POLICY has been created.
primaryfcs:admin>

Summary of Contents for StorageWorks MSA 2/8 - SAN Switch























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands