HP StorageWorks MSA 2/8 - SAN Switch, Reference Manual

Page: 382 / 982

Fabric OS Commands
382 Fabric OS Version 3.1.x/4.1.x Reference Guide
Parameters: V4.1.x
For a StorageWorks Core switch, you must set values for both logical switches
and both CP cards. Use the
option
operand to select the logical switch or CP
where you want to configure an IP address. The
option
operand is only
available for the StorageWorks Core switch. If the
option
operand is not
specified for a StorageWorks Core switch, the command becomes interactive.
Each Logical switch has:
■
Ethernet IP Address
■
Ethernet Subnetmask
■
Fibre Channel IP Address
■
Fibre Channel Subnetmask
Each CP has:
■
Ethernet IP Address
■
Ethernet Subnetmask
■
Host Name
■
Gateway IP Address
The default values for hostname, ipaddress, subnet address (for CP only), mask
(for switch only), and gateway address (for CPs only) are:
■
sw0 = hostname SW12000_1, ip 10.77.77.77, mask 255.0.0.0
■
sw1 = hostname SW12000_2, ip 10.77.77.76, mask 255.0.0.0
■
cp0 = hostname cp0, ip 10.77.77.75, subnet 255.0.0.0, gateway 0.0.0.0
■
cp1 = hostname cp1, ip 10.77.77.74, subnet 255.0.0.0, gateway 0.0.0.0
Entering Values and Saving Changes
After each prompt the current value is shown. You may:
■
Press
Enter
to retain the current value
■
Enter an IP address in conventional dot notation
■
Enter
none
Fibre Channel
Subnetmask Set the Fibre Channel subnetmask of the switch.
Gateway Address Set the gateway IP address for the switch.