HP StorageWorks MSA 2/8 - SAN Switch, Reference Manual

Page: 942 / 982

Security Commands
942 Fabric OS Version 3.1.x/4.1.x Reference Guide
Commands Exclusive to the Primary FCS
The following commands are available only on the Primary FCS when security is
installed and enabled.
Table 28: Commands Exclusive to the Primary FCS
Command Notes
agtcfgset
Can be run on all switches, but it needs to be run on
the Primary FCS to modify community strings
agtcfgdefault
Must be run from the Primary FCS switch.
aliadd
Must be run from the Primary FCS switch.
alicreate
Must be run from the Primary FCS switch.
alidelete
Must be run from the Primary FCS switch.
aliremove
Must be run from the Primary FCS switch.
alishow
Must be run from the Primary FCS switch.
cfgadd
Must be run from the Primary FCS switch.
cfgclear
Must be run from the Primary FCS switch.
cfgcreate
Must be run from the Primary FCS switch.
cfgdelete
Must be run from the Primary FCS switch.
cfgdisable
Must be run from the Primary FCS switch.
cfgenable
Must be run from the Primary FCS switch.
cfgremove
Must be run from the Primary FCS switch.
cfgsave
Must be run from the Primary FCS switch.
cfgshow
Must be run from the Primary FCS switch.
cfgtransabort
Must be run from the Primary FCS switch.
cfgtransshow
Must be run from the Primary FCS switch.
date
This command can be run on all switches to view the
current date. You can only modify the date from the
Primary FCS switch.
fazoneadd
Must be run from the Primary FCS switch.
fazonecreate
Must be run from the Primary FCS switch.
fazonedelete
Must be run from the Primary FCS switch.
fazoneremove
Must be run from the Primary FCS switch.
fazoneshow
Must be run from the Primary FCS switch.