manualshive.com logo in svg

HP StorageWorks MSA 2/8 - SAN Switch, Reference Manual

Share
Download
HP StorageWorks MSA 2/8 - SAN Switch Reference Manual Download Page 490

Fabric OS Commands

490

Fabric OS Version 3.1.x/4.1.x Reference Guide

Add a filter-based monitor for the SCSI Write command.

Synopsis: V3.1.x

perfAddWriteMonitor portnumber[, “alias”]

Synopsis: V4.1.x

perfAddWriteMonitor [slotnumber/]portnumber[, “alias”]

Availability

Admin

Release

V3.1.x and V4.1.x

Description

Use this command to define filter-based monitors to count the number of SCSI 
FCP Write commands in Fibre Channel frames.

After a successful execution of this command, a monitor number is displayed. The 
monitor number is provided for easy manipulation of these filter-based 
performance monitors. The optional user-defined alias is also displayed if one was 
specified. All valid monitor numbers and user-defined aliases can be retrieved 
with the

 perfShowFilterMonitor 

command.

The maximum number of filters is 8 per port including user-defined filters, read 
filters, write filters and read/write filters.

Note:  

This command requires an Advanced Performance Monitoring license.

perfAddWriteMonitor

Summary of Contents for StorageWorks MSA 2/8 - SAN Switch























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands