HP StorageWorks MSA 2/8 - SAN Switch, Reference Manual

Page: 843 / 982

systemverification
843 Fabric OS Version 3.1.x/4.1.x Reference Guide
Run a suit of diagnostic tests on all switches in a fabric.
Synopsis
systemverification [-parameters | -short]
Availability
Admin
Release
V4.1.x
Description
Use this command to run a comprehensive system wide test of all switches in a
fabric. It will initiate a burnin run on all switches within the current system.
The run can be terminated by issuing a control “c”
<Ctrl-c>
character from
the initiating terminal. All of the burnin features are operational during the
systemverification
command. The
burninerrshow
will display the
stored burnin errlogs, the logs by blade are saved in
/var/log/switchburnin.<switch>.<slot>
files. On the fixed port
count products, the slot defaults to 0.
The command monitors the testing, and will terminate the burnin activity if all the
elements have failed. Each failing slot will only output the first observed fail.
Since this monitoring is a polling activity, the command number output may not
be the exact command number that failed. After the testing has terminated,
burninstatus
command is output, and the
burninerrshow
messages
for the failing slots are output. If all slots pass, then only the
burninstatus
command output is displayed.
The burnin tests are designed to operate with switches connected to a fabric and
restricts the frame loopback to inside the unit. If loopback plugs are installed in all
ports, the burnin parameter min_lb_mode can be changes to 1 to test the fibre
channel through the loopback plug.
systemverification