manualshive.com logo in svg

HP StorageWorks MSA 2/8 - SAN Switch, Reference Manual

Share
Download
HP StorageWorks MSA 2/8 - SAN Switch Reference Manual Download Page 882

Fabric OS Commands

882

Fabric OS Version 3.1.x/4.1.x Reference Guide

Displays firmware version information.

Synopsis

version

Availability

All users.

Release

V3.1.x and V4.1.x

Description

Use this command to display firmware version information and build dates. 

The following fields are displayed:

Usually the Made on and Flash dates are the same, since the switch starts running 
flash firmware at power-on. However, in the time period between

 

firmwareDownload 

and the next reboot, the dates can differ.

Operands

None.

version

Kernel:

Displays the version of switch kernel operating system.

Fabric OS:

Displays the version of switch Fabric OS.

Made on:

Displays the build date of firmware running in switch.

Flash:

Displays the build date of firmware stored in flash PROMs.

BootProm:

For V3.1.x, this field displays the build date of firmware stored 

in boot PROM
For V4.1.x, this field displays the version of the firmware 

stored in the boot PROM.

Summary of Contents for StorageWorks MSA 2/8 - SAN Switch























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands