manualshive.com logo in svg

HP StorageWorks MSA 2/8 - SAN Switch, Reference Manual

Share
Download
HP StorageWorks MSA 2/8 - SAN Switch Reference Manual Download Page 55

backplanetest

55

Fabric OS Version 3.1.x/4.1.x Reference Guide

Backplane connection test for multiple blade configured system.

Synopsis

backplanetest [-slot number][-passcnt count][-payload 
value][-pat type][-ports list][-verbose mode]

Availability

Admin

Release

V4.1.x

Description

Use this command to verify the function of the backplane connection of the blades 
through the backend external ports. This command is for the StorageWorks Core 
switch only. This command is not part of blade diagnostics; it is used to verify 
backplane connection by using the blade's frame transmitter/receiver features.

When this test is run, no other diagnostic can be executed until this test completes.

Options

This command has the following operands:

backplanetest

-slot number

Specify the slot number for a StorageWorks Core 

switch. For all other switches this operand is not 

required. The slot number must be followed by a slash 

( / ) and the port number, so that each port is 

represented by both slot number (1 through 4, or 7 

through 10), and port number (0 through 15).
The StorageWorks Core switch has a total of 10 slots. 

Slots number 5 and 6 are control processor cards, and 

slots 1 through 4, and 7 through 10, are port cards. On 

each port card, there are 16 ports counted from the 

bottom, 0 to 15.

-passcnt count

Specify the number of times to perform this test. The 

default value is 1. This operand is optional.

Summary of Contents for StorageWorks MSA 2/8 - SAN Switch























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands