HP ProCurve 530 NA, Management And Configuration Manual

Page: 150 / 556

5-66
General System Configuration
Managing Group Configuration
The current members of the selected group are listed in the Members list.
N o t e
The IP addresses of the other members of the group appear as links. To jump
to the configuration interface of another member, click on its link.
When a group is being formed, there may be a delay of up to 2 seconds before
all members are listed.
Figure 5-16. Configuring Group Configuration
To add Group Configuration to the current access point:
1. Click
Management > Group Configuration
.
2. Click
Enabled
to allow this access point to share configuration parameters
with others in the same group.
3. In
Group Name
enter the name of the group the access point should belong
to.
4. In
Member ID
enter a string (optional) that identifies the access point within
the group.
5. Click
[Update]
.