HP ProCurve 530 NA Management And Configuration Manual Download Page 377

Page: 377 / 556

9-69

Command Line Reference

RADIUS Users

The access point provides configuration to add local RADIUS user information
in the network.

radius-local

The commands are used to set up and manage user accounts on the built-in
RADIUS server.

Syntax

radius-local <

username

> [ disabled ] | [ password <

password

> | realname

realname

no radius-local

•

username

- Create a new user account or modify an already existing

account with the specified username. The

version of the command

removes the user account with the specified username.

(Maximum

characters - 50)

•

disabled

Set the user account to be disabled. The no version of the

command re-enables the user account.

•

password

Specifies the password to be used with the user account.

(Range: 1-32 alphanumeric characters)

•

realname

Specifies the real name for the account holder on the user

account.
(No spaces. Maximum characters - 50)

Default Setting

None

Command

Function

Mode

Page

[no] radius-local

username>

[disabled]

| [ password

<password>

realname

<realname>

]

Configure a new radius-local user account or modify

a user account.

9-69

show radius-local

Shows the radius-local users.

9-70

Summary of Contents for ProCurve 530 NA













































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ProCurve 530 NA

Reviews:

Related manuals for ProCurve 530 NA

Brands by name

Popular brands

HP ProCurve 530 NA, Management And Configuration Manual

Search results

Summary of Contents for ProCurve 530 NA

Reviews:

Related manuals for ProCurve 530 NA

Brands by name

Popular brands