manualshive.com logo in svg

HP ProCurve 530 NA, Management And Configuration Manual

Share
Download
HP ProCurve 530 NA Management And Configuration Manual Download Page 4

© Copyright 2008 Hewlett-Packard Development Company, L.P. The 
information contained herein is subject to change without notice.

This document contains proprietary information, which is 
protected by copyright. No part of this document may be 
photocopied, reproduced, or translated into another 
language without the prior written consent of Hewlett-
Packard. 

Publication Number

5991-2193
December 2008

Applicable Products

Trademark Credits

Windows NT®, Windows®, and MS Windows® are US 
registered trademarks of Microsoft Corporation.

Disclaimer

HEWLETT-PACKARD COMPANY MAKES NO WARRANTY 
OF ANY KIND WITH REGARD TO THIS MATERIAL, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not 
be liable for errors contained herein or for incidental or 
consequential damages in connection with the furnishing, 
performance, or use of this material.

The only warranties for HP products and services are set 
forth in the express warranty statements accompanying 
such products and services. Nothing herein should be 
construed as constituting an additional warranty. HP shall 
not be liable for technical or editorial errors or omissions 
contained herein.

Hewlett-Packard assumes no responsibility for the use or 
reliability of its software on equipment that is not furnished 
by Hewlett-Packard.

Warranty

See the Customer Support/Warranty booklet included with 
the product.

A copy of the specific warranty terms applicable to your 
Hewlett-Packard products and replacement parts can be 
obtained from your HP Sales and Service Office or 
authorized dealer. 

Open Source Software Acknowledgement 
Statement

This software incorporates open source components that 
are governed by the GNU General Public License (GPL), 
version 2. In accordance with this license, ProCurve 
Networking will make available a complete, machine-
readable copy of the source code components covered by 
the GNU GPL upon receipt of a written request. Send a 
request to: 

Hewlett-Packard Company, L.P.

AP 530 Program

GNU GPL Source Code

Attn: ProCurve Networking Support

MS: 5551

Roseville, CA 95747 USA

Open source licenses pertaining to the open source software 
included with the product can be found in Appendix C in this 
guide.

ProCurve Wireless Access Point 530 NA 

(J8986A)

ProCurve Wireless Access Point 530 WW

(J8987A)

Summary of Contents for ProCurve 530 NA













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands