manualshive.com logo in svg

HP ProCurve 530 NA, Management And Configuration Manual

Share
Download
HP ProCurve 530 NA Management And Configuration Manual Download Page 478

A-4

File Uploads, Downloads, and Resets

Downloading Access Point Software

Downloading Access Point Software

The ProCurve support site periodically provides access point software 
updates through the ProCurve Web site (visit 

http://www.procurve.com/software

 and 

select Wireless access points). After you acquire a new access point software 
file, you can use one of the following methods for downloading the software 
code to the access point.

General Software Download Rules

After an access point software download, the access point will automatically 
reboot and implement the newly downloaded code. 

N o t e s

■

Downloading new software does not change the current access point 
configuration. The access point configuration is contained in a separate 
file that can also be transferred, for example, for archive purposes or to 
be used in another access point of the same model. It is recommended 
that you save a copy of the configuration file before upgrading your access 
point software. See 

“Transferring Configuration Files” on page A-8

, for information 

on saving the access point’s configuration file.

■

After updating the access point software, be sure to clear the browser 
cache before attempting to manage the access point using the Web 
interface. 

Assumptions for Using TFTP, FTP, or SCP To Download 
Software from a Server

This procedure assumes that:

■

A software file for the access point has been stored on a TFTP, FTP, or 
SCP server accessible to the access point. (The access point software file 
is typically available from the ProCurve Web site at 

http://www.procurve.com/software

.

) 

■

The access point is properly connected to your network and has already 
been configured with a compatible IP address and subnet mask.

Before you use the procedure, do the following:

■

Obtain the IP address of the TFTP, FTP, or SCP server on which the access 
point software file has been stored.

■

If VLANs are configured on the access point, determine the name of the 
VLAN in which the TFTP, FTP, SCP server is operating.

Summary of Contents for ProCurve 530 NA













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands