manualshive.com logo in svg

HP ProCurve 530 NA, Management And Configuration Manual

Share
Download
HP ProCurve 530 NA Management And Configuration Manual Download Page 329

9-21

Command Line Reference

System Management Commands

password manager

This command sets the password for entering the Manager Exec level. 

Syntax 

password manager <

password

>

•

password

 - A text string to establish security for entry into the Manager 

Exec level. 
Note: The password is case sensitive and must be at least 1 character 
and at most 32 characters long. However, only the first 8 characters 
of the password are used; character number 9 and above are ignored 
at log in.

Default Setting 

admin 

Command Mode 

Global Configuration

Example 

buttons

This command enables the ability to clear the password(s) and/or configura-
tion(s) via the buttons on the device. The no command disables this ability.

Syntax 

buttons <custom-reset | factory-reset | password-reset | system-reset> 

•

custom-reset

 - Enables the ability to reset this device to the custom-

default configuration via the buttons. The no version of the command 
disables this devices ability to reset this device to the custom-default 
configuration via the buttons.

•

factory-reset 

- Enables the ability to reset this device to the factory-

default configuration via the buttons. The no version of the command 
disables this devices ability to reset this device to the factory-default 
configuration via the buttons. The no buttons factory-reset command 
will not work if the serial console is already disabled (e.g." no console" 
has been executed).

ProCurve Access Point 530# configure

ProCurve Access Point 530(config)# password manager admin

Summary of Contents for ProCurve 530 NA













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands