HP ProCurve 530 NA, Management And Configuration Manual

Page: 165 / 556

6-13
Wireless Interface Configuration
Configuring the Radio
N o t e
When the radio is configured for auto channel selection, any radio mode
changes result in a five- to ten-second delay as the optimum radio channel
is determined and selected.
■ Maximum Stations: The maximum number of stations allowed to access
the applicable radio at any one time. (The default is
256
.)
■ [Update]: Updates the radio parameters.
Figure 6-2. Configuring Basic Radio Settings
To Modify Basic Radio Settings:
1. Select
Network Setup > Radio
.
2. Select the radio channel from the drop-down. If you are deploying access
points in the same area, see the key points summarized in section
“Overview”
on page 6-3
.
3. To set a limit on the number of stations accessing the access point, enter
a value within the applicable range in the
Maximum Stations
field.
4. Click
[Update]
.