manualshive.com logo in svg

HP ProCurve 530 NA, Management And Configuration Manual

Share
Download
HP ProCurve 530 NA Management And Configuration Manual Download Page 402

9-94

Command Line Reference

Ethernet Interface Commands

Example 

ip address 

This command configures the IP address settings for the interface. The no 
version of the command clears the statically assigned IP address and network 
mask.

Syntax

ip address <

ip

> [<

mask

>] | <

ip

>/<

bits

> | dhcp 

no ip address 

•

ip

 - Specifies the static IP address to be used when DHCP is not used. 

The no version of the command clears the statically assigned IP 
address and network mask.

•

mask

 - Specifies the static network mask to be used when DHCP is not 

used. The no version of the command clears the statically assigned IP 
address and network mask.

•

bits

 - Specifies the static network mask in CIDR notation to be used 

when DHCP is not used. The no version of the command clears the 
statically assigned IP address and network mask.

•

dhcp

 

- Enables the DHCP client on this interface. The no version of the 

command disables the DHCP client on this interface.

Default Setting 

IP address: 192.168.1.1
Netmask: 255.255.255.0

Command Mode 

Interface Configuration (Ethernet)

Command Usage 

CAU T I O N

In order to disable the DHCP and assign a Static IP address, you must have a 
serial port connection to the AP. Otherwise, you will lose connectivity during 
the process of assigning a new static IP address.

ProCurve Access Point 530# configure

ProCurve Access Point 530(config)# dns secondary 10.1.0.55

ProCurve Access Point 530(config)# 

Summary of Contents for ProCurve 530 NA













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands